Storage for POSSO Media Box for VHS cassettes

This is an attempt to build a storage solution for the unused POSSO Media Box system for VHS cassettes.
4
16
0
209
updated March 16, 2024

Description

PDF

This is a solution for a potentially unused POSSO media box system for VHS cassettes. I have designed a variety of storage containers that fit into the space of a single VHS cassette. For different purposes, I have created storage containers with various sizes, allowing for the possibility of having more than one container in the space of a single VHS cassette. The height is always fixed to that of the VHS cassette. I have designed containers with lengths of 33%, 50%, or 66% of a VHS cassette to provide greater flexibility and the ability to store smaller objects in a single POSSO media box system.

used Nozzle: 0.6mm (recommended - only 2 perimeter needed)

Material: PLA

Recommended print parameter (for print settings: 0.32mm SPEED):

  • Bottom fill pattern: Concentric
  • Elephant foot compensation: 0.3mm (should be adapted by user)
  • Complete individual objects: on

Additional print parameters for top cover:

  • Spiral vase: on

 

The .3mf files uses custom G-Code with 150 °C for bed leveling for PLA. This only works when the nozzle is completly clean and no PLA is visible. During heat up at approx. 100 °C I use pliers and grab the visible PLA which oozed from the last cooldown and pull them until the nozzle is hot enough and the PLA snaps and leave the nozzle clean.

 

Beschreibung

Hier präsentiere ich eine Lösung für ungenutzte POSSO Media Box Systeme für VHS-Kassetten. Da VHS-Kassetten mittlerweile fast ausgestorben sind bzw. die Lieblingsfilme als DVD, Blu-ray oder online verfügbar sind, haben die POSSO Boxsysteme für VHS-Kassetten ausgedient. Sie sind viel zu schade, um einfach weggeworfen zu werden. Daher habe ich kleine Boxen für ein einzelnes VHS-Kassettenfach entworfen. Die Boxen haben die Größen 100%, 66%, 50% und 33% einer VHS-Kassette, sodass mehrere dieser Boxen anstelle einer Kassette Platz finden können. Die verschiedenen Boxen lassen sich kombinieren zu 2x 50%, 33% & 66% oder 3x 33% anstelle einer einzelnen mit 100%. Die Höhe ist immer auf die Höhe einer VHS-Kassette beschränkt. So lassen sich mehr kleinere Objekte ordentlich in einer einzelnen POSSO Media Box unterbringen.

Die .3mf Dateien haben im „Custom G-Code“ eine Düsentemperatur von 150 °C für PLA eingestellt, um sauber das “Bed Leveling” machen zu können. Dafür muss unbedingt die Düse sauber sein. Um dies zu erreichen, benutze ich eine Zange und greife beim Hochheizen das vom letzten Druck ausgetretene PLA (bei ca. 100 °C)  und ziehe dieses aus der Düse heraus, bis es sich von selbst von der Düse löst. Danach sollte die Düse sauber sein für das Bed Leveling.
 

Tags



Model origin

The author marked this model as their own original creation.

License