Wifi Antenna Right Angle Support Clip

The antenna on my Laser engraver no longer wanted to stay at a 90 degree angle, and would hang out getting in the way. Needed something to hold it in-place, so adapted @Handte39's model to make a right angle clip.

Best orientation to print is sitting flat on the central piece, no supports required. Lower layer heights will ensure cleaner overhangs.

Example pictured printed as follows:

• Layer Height: 0.08mm
• Nozzle Size: 0.4mm
• Walls/Perimeters: 3
• Infill: 15% Gyroid
• Filament: Black - Bambu PLA Basic

Adapted the original to make a dual right-angled clip. Duplicated the original mount, rotated 90 degrees, and added the structure between the 2 clips.