{"data":{"model":{"id":"789673","slug":"new-wire-shelving-backstop-clip","name":"New wire shelving backstop clip","authorship":"remix","club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"0","myRating":null,"ratingCount":0,"description":"

Shelve Remix - Remix

Here is another remix, based on the work of \"Triple G Workshop\" and my own remix, which can not only be used between the horizontal bars of the bottom grid of the \"Amazon Basics Shelf with Castors\" shelf as a divider or backstop for the sides and in the middle of the shelf, but also at the back or front as protection against stored items falling off. So it can be used multiple times. I have designed 2 thicknesses, one in the existing thickness of 11mm, the other approx. 36% thicker, i.e. 15mm for those who require greater load-bearing capacity.

In addition, the new parts can also be used in the old function, so they can be used twice.

In principle, there are 2 possibilities for slicing or printing:
1.) upright: then more models fit on the print area (up to 41! (printing time 5d4h; filament requirement >500m)) but with a printing time of approx. 3.5 hours (0.3mm draft) per part. Supports not required during printing.
2.) horizontal: fewer models (max. 4, (printing time approx. 11h, filament requirement approx. 50m)) fit on the printing surface, the printing time for 1 model is reduced to approx. 2.45 hours with the same settings, but the print looks better overall with the same settings, but supports should be set in the lower area of the part at the base.

I recommend organic supports, \" grid\" and \"snug\" may be more difficult to remove, apply a little, this could make the slot, which was narrowly dimensioned for stability reasons, too narrow and crack the base when inserted.
The published .gcode files are sliced in draft style with a layer thickness of 0.3mm. If you value beauty, I recommend 0.2mm or even less...
Material: HT-PLA or PETG

and: https://www.printables.com/de/model/791058-new-wire-shelving-backstop-clip-connecting-rods (connecting rods for the clips)

-------------------------------------------------------------------------------------------------------------

Shelve Remix - Remix

Hier ein erneuter Remix , basierend auf dem Werk von \"Triple G Workshop\" und meinem eigenen Remix, welcher nicht nur zwischen die horizontalen St\u00e4be des Bodengitters vom Regal \"Amazon Basics Regal mit Rollen\" als Teiler oder Backstop f\u00fcr die Seiten und in der Mitte des Regals verwendet werden kann, sondern auch an der R\u00fcck- oder Vorderseite als Schutz gegen das Herunterfallen von gelagerten Gegenst\u00e4nden. Ist also mehrfach verwendbar. Ich habe 2 St\u00e4rken designt, eine in der vorhandenen St\u00e4rke von 11mm, die andere um ca 36% dicker, also 15mm f\u00fcr die die gr\u00f6\u00dfere Belastungsf\u00e4higkeit voraussetzen.

\u00dcberdies lassen sich die neuen Teile auch in der alten Funktion weiterverwenden, sind somit doppelt verwendbar.

Es g\u00e4be im Prinzip 2 M\u00f6glichkeiten zu slicen bzw. zu drucken:
1.) aufrecht: dann passen mehr Modelle auf den Druckbereich (bis zu 41! (Druckzeit 5d4h; Filamentbedarf >500m)) allerdings bei Druckzeit von ca 3,5 Stunden (0,3mm draft) pro Teil. St\u00fctzen beim Druck nicht erforderlich.
2.) liegend: passen weniger Modelle (max 4, (Druckzeit ca. 11h, Filamentbedarf ca 50m)) auf die Druckfl\u00e4che, die Druckzeit verk\u00fcrzt sich f\u00fcr 1 Modell auf ca 2,45 Stunden mit den selben Einstellungen, der Druck sieht allerdings insgesamt bei gleichen Einstellungen auch besser aus, allerdings sollten St\u00fctzen im unteren Bereich des Teils an der Basis eingestellt werden.

Dabei empfehle ich organische St\u00fctzen, \"Gitternetz\" und \"nahtlos\" sind u.U. schwerer zu entfernen, trage etwas auf, dadurch k\u00f6nnte der Schlitz, der aus Stabilit\u00e4tsgr\u00fcnden knapp bemessen wurde, zu eng werden und die Basis beim Einsetzen sprengen.
Die ver\u00f6ffentlichen .gcode-Dateien sind mit einer Schichtdicke von 0,3mm im draft-Stil gesliced. Wenn Sie Wert auf Sch\u00f6nheit legen, empfehle ich 0,2mm oder auch darunter...
Material: HT-PLA oder PETG

siehe auch: https://www.printables.com/de/model/775181-wire-shelving-clip-in-dividerstoppers-adapted-for- (erste Version)

und: https://www.printables.com/de/model/791058-new-wire-shelving-backstop-clip-connecting-rods (Verbindungsst\u00e4be)

","category":{"id":"50","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","description":"Are you a maker? Everyone is, be a printer. Upgrade your home workshop and combine different materials and methods of crafting including 3D printing.","__typename":"CategoryType"},{"id":"50","name":"Organizers","nameEn":"Organizers","description":"Tidy up your tools and small parts and keep track of them. Print plastic storage cases, modular organizers, cable spools, drawer system, racks and more.","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2024-03-03T18:48:53.578369+00:00","firstPublish":"2024-03-02T20:30:53.857416+00:00","datePublished":"2024-03-03T18:48:53.539473+00:00","dateCreatedThingiverse":null,"nsfw":false,"aiGenerated":false,"politicalContent":false,"summary":"New Clip usable as backstop AND divider on Amazon shelving with rolls, 90\u00b0 rotated in both functions","likesCount":6,"makesCount":0,"liked":null,"printDuration":"2.77","numPieces":2,"weight":"38.00","nozzleDiameters":["0.40"],"usedMaterial":null,"layerHeights":["0.30"],"mmu":false,"materials":[{"id":"1","name":"PLA","__typename":"MaterialTypeType"}],"dateFeatured":null,"downloadCount":40,"displayCount":202,"filesCount":4,"privateCollectionsCount":5,"publicCollectionsCount":7,"pdfFilePath":"media/prints/789673/pdfs/789673-new-wire-shelving-backstop-clip-37a8e16b-5fbc-4c05-b6c8-31ad82d68ccf.pdf","commentCount":0,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"addMakePermission":null,"printer":{"id":"1","name":"Prusa MK3/S/S+","__typename":"PrinterTypeType"},"image":{"id":"2857272","filePath":"media/prints/789673/images/6121882_19fa9183-a325-4a61-8ae3-d3e8f8f69426_ae019d8a-84d6-47ef-98b0-847c3efc9876/e20240302_184950.jpg","rotation":0,"imageHash":"nPcFDQJg2pyGRnt2hpd2Zo+W+0fa","imageWidth":1500,"imageHeight":2000,"__typename":"PrintImageType"},"images":[{"id":"2857272","filePath":"media/prints/789673/images/6121882_19fa9183-a325-4a61-8ae3-d3e8f8f69426_ae019d8a-84d6-47ef-98b0-847c3efc9876/e20240302_184950.jpg","rotation":0,"imageHash":"nPcFDQJg2pyGRnt2hpd2Zo+W+0fa","imageWidth":1500,"imageHeight":2000,"__typename":"PrintImageType"},{"id":"2857274","filePath":"media/prints/789673/images/6121880_bfd21995-fc09-45c9-88ad-a3fec17227aa_7ed35273-b8b5-4220-a63d-7734dc10c933/e20240302_163007.jpg","rotation":0,"imageHash":"VwgKDQK2t393x1hIeHtHiLucv8v6","imageWidth":1500,"imageHeight":2000,"__typename":"PrintImageType"},{"id":"2857271","filePath":"media/prints/789673/images/6121881_5febe2c5-4c19-4d52-a377-f9e0d3297946_f5901186-61b6-4d56-bfee-f6bba1b118b0/e20240302_184547.jpg","rotation":0,"imageHash":"4hgKDQD0R3yFmFl1h4lmePmOy8/H","imageWidth":1500,"imageHeight":2000,"__typename":"PrintImageType"},{"id":"2857273","filePath":"media/prints/789673/images/6121883_91c97c9c-f50f-4c88-a15b-54100bdfa8b7_dd2e1c49-14a9-46bb-8ab8-c17481e131ac/e20240302_185023.jpg","rotation":0,"imageHash":"HggKBQBwl4mKdoiXZ4iIh/me2N+K","imageWidth":1500,"imageHeight":2000,"__typename":"PrintImageType"},{"id":"2857277","filePath":"media/prints/789673/images/6121891_46db8683-c2c0-4cc6-a024-af44fa392cfb_93a4c048-bfb1-4310-a2db-28441e16953b/shelve-modell-backstopp-stutzen.jpg","rotation":0,"imageHash":"1SgGHIg/eYith3h0aYRJvdD0WQ==","imageWidth":708,"imageHeight":381,"__typename":"PrintImageType"},{"id":"2857278","filePath":"media/prints/789673/images/6121889_874d63b4-2aac-47f7-9e6f-e06859e3df37_30730f87-005b-43cf-ab50-dd2609236a57/shelves-3.jpg","rotation":0,"imageHash":"YwgGFIL3WHd8eIeOc4gHd3BwBw==","imageWidth":769,"imageHeight":465,"__typename":"PrintImageType"},{"id":"2857275","filePath":"media/prints/789673/images/6121890_6a03f5cb-cdaa-480c-9ae4-9f5923b0089a_dd4d8660-af3c-4e7f-bf0e-ab9543cc9c98/shelves-41.jpg","rotation":0,"imageHash":"oxgKLYb3WHd7iId9hIh4iAeIcoAo","imageWidth":825,"imageHeight":573,"__typename":"PrintImageType"},{"id":"2857276","filePath":"media/prints/789673/images/6121888_1787b75f-c85c-4e37-a69a-85830b34208a_ad9340f0-742e-45ba-ba5d-c125af9674fe/shelve-modell-backstopp.jpg","rotation":0,"imageHash":"VtgJFYh3d3eZd4h/dqh3fihYcH36","imageWidth":910,"imageHeight":589,"__typename":"PrintImageType"}],"imagesCount":8,"tags":[{"name":"shelf","id":"18","__typename":"TagType"},{"name":"clip","id":"339","__typename":"TagType"},{"name":"amazon","id":"815","__typename":"TagType"},{"name":"storage","id":"1916","__typename":"TagType"},{"name":"closet","id":"2502","__typename":"TagType"},{"name":"garage","id":"2784","__typename":"TagType"},{"name":"divider","id":"3346","__typename":"TagType"},{"name":"shelving","id":"4385","__typename":"TagType"},{"name":"wire","id":"5686","__typename":"TagType"},{"name":"organisation","id":"8718","__typename":"TagType"},{"name":"backpacking","id":"11852","__typename":"TagType"},{"name":"regal","id":"20301","__typename":"TagType"},{"name":"sicherung","id":"26431","__typename":"TagType"},{"name":"wired","id":"31206","__typename":"TagType"},{"name":"draht","id":"90878","__typename":"TagType"},{"name":"gestell","id":"99514","__typename":"TagType"},{"name":"absturzsicherung","id":"176485","__typename":"TagType"},{"name":"teiler","id":"192723","__typename":"TagType"},{"name":"stopperholder","id":"197469","__typename":"TagType"},{"name":"drahtgestell","id":"201896","__typename":"TagType"},{"name":"regalteiler","id":"201897","__typename":"TagType"},{"name":"rollingshelf","id":"201898","__typename":"TagType"},{"name":"rollregal","id":"201899","__typename":"TagType"},{"name":"regalstopper","id":"201900","__typename":"TagType"},{"name":"regalsicherung","id":"205293","__typename":"TagType"},{"name":"unterleilung","id":"205294","__typename":"TagType"}],"thingiverseLink":null,"filesType":"GCODE","previewFile":{"id":"3357125","filePreviewPath":"media/prints/789673/stls/6121863_367d2d3c-29f0-4c23-83cc-e2804936476e_bba8875b-b435-4705-934c-575b8640551a/wire-shelving-backstop-clip-e_preview.png","__typename":"STLType"},"license":{"id":"2","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[{"id":"455051","modelId":"775181","modelName":"Wire Shelving Clip-in Divider/Stoppers - adapted for 30mm","modelAuthor":{"id":"196240","handle":"RPK_196240","verified":false,"publicUsername":"RPK","__typename":"UserType"},"model":{"id":"775181","name":"Wire Shelving Clip-in Divider/Stoppers - adapted for 30mm","slug":"wire-shelving-clip-in-dividerstoppers-adapted-for-","datePublished":"2024-03-03T18:45:37.105200+00:00","image":{"id":"2811032","filePath":"media/prints/775181/images/6024236_1306ac81-7475-4c9e-8e32-2f7b836b7be8_ea4476fb-ee80-4f14-aa0f-f93ba4b9ef99/20240221_210514.jpg","rotation":0,"imageHash":"XRgODQRgWmmHiIlneHl3mP2U/4+a","imageWidth":1500,"imageHeight":2000,"__typename":"PrintImageType"},"club":false,"authorship":"remix","license":{"id":"2","name":"Creative Commons \u2014 Attribution \u2014 Share Alike","disallowRemixing":false,"__typename":"LicenseType"},"eduProject":null,"__typename":"PrintType"},"url":null,"urlAuthor":null,"urlImage":null,"urlTitle":null,"urlLicense":null,"urlLicenseText":null,"__typename":"PrintRemixType"}],"remixDescription":"

My original remix of the smaller model from \"Triple G Workshop\" was adapted to the required dimensions of the \"Amazon Basics Wheeled Shelving Unit\". However, this meant that the part could only be used as a divider or backstop for the side sections and the middle of the shelf. The new remix therefore has the advantage that the front and rear wall of the shelf can also be protected and the new clips can be used both in the old and in the new function to prevent stored objects from falling.

\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026\u2026.

Mein urspr\u00fcnglicher Remix von dem kleineren Model von \"Triple G Workshop\" wurde an die erforderlichen Ma\u00dfe des \"Amazon Basics Regal mit Rollen\" angepa\u00dft. Damit konnte man das Teil allerdings nur als Teiler oder Backstop f\u00fcr die Seitenteile und der Mitte des Regals verwenden. Der erneute Remix bringt somit den Vorteil, da\u00df man auch die Front und der Hinterwand des Regals sch\u00fctzen und die neuen Clips sowohl in der alten wie auch in der neuen Funktion zur Absturzvermeidung gelagerter Gegenst\u00e4nde verwenden kann.

","easyprintProjects":[],"__typename":"PrintType","eligibleForNomination":false,"priceBeforeSale":null,"user":{"id":"196240","handle":"RPK_196240","verified":false,"dateVerified":null,"publicUsername":"RPK","avatarFilePath":"","badgesProfileLevel":{"profileLevel":26,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"isHiddenForMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"prusameterPoints":null,"latestContestResult":null,"referencingArticles":[]}}}

New wire shelving backstop clip

Makes Add make

Comments

Makes