Magnetic Tool Cup

A magnetic tool holder designed specifically to work with Ikea Sektion cabinets, but should work with any magnetic surface. The model has holes that accept 5mm diameter by 5mm long magnets (9 in total, 6 minimum). Those same magnets fit perfectly in the shelf pin holes on the Ikea cabinet (I lock them in place with a dab of CA glue). 

Steps for install, insert magnets into shelf pin holes with a dab of glue making sure the polarity of the magnets is in the same direction. Then insert magnets into the model in an orientation that allows them to attract to the magnets in the shelf pin holes. 

There are two side rings on the model for hanging tweezers off of, but feel free to break those off if they are in the way, they should be thin enough walled that you can break them by hand.