16-LED neopixel ring mount for 2020 extrusion (CR-6 SE)

This allows you to mount a 16-pixel neopixel ring to a 2020 extrusion, for instance your gantry. In my case I developed this for the Creality CR-6 SE, but it should work on any Ender 3-like printer with a 2020-extrusion.

There is also a cable clip included which might come in handy.

Check my full installation guide!

Step/Fusion360 files are included to allow further customization.

Bill of materials

• 1 M3 T-nut
• 1 M3x10

• 4 M3x5 Alternatively, you can glue the thing together.

  Print Settings

Printer:

Creality CR-6 SE

Rafts:

No

No

Resolution:

200

](http://www.amazon.com/s?url=search-alias&field-keywords=Creality+HPPLA&tag=thingiverse09-20)[ Creality](https://www.amazon.com/s?k=creality&linkCode=ll2&tag=thingiverse09-20&linkId=fb73b7199b6aab27c98136def5ec96ae&language=en_US&ref_=as_li_ss_tl) HPPLA Gray Post-Printing

Screw in the M3 screws of the ring mounts to the gantry mount, or glue it together.
Next, insert the long M3 screw and use it with the T-nut to attach it to your gantry or other extrusion.