Sectional containers/pillboxes

A sectional container for storage of small objects such as screws.  It can also be used as a pillbox.  It can be printed with either 6 or 8 sections in 3 sizes: small (50mm), medium (100mm), and large (150mm).  There is also a small protrusion on the bottom of the cover to make the opening hold in place over a specific section.

You don't really need glue for the assembly (I didn't use any), but if the pin is too loose you can either scale it up (like 1% or something) or glue it with a gap filling glue.  

Printed at 0.2 mm layer height.  No supports required.