This is a multiboard holder for a thin deburring tool (mine is a Milwaukee brand). It can also be used for a simple pencil or pen.
It uses a MultiConnect Peg to mount it to a Multiboard, so you can easily move it around to your ideal place.
I've included the STEP file for the holder so you can resize or adjust if necessary.
Print Instructions: The holder itself I printed at a layer height of .2 mm and 10% Gyroid infill pattern. (The peg slot has a .2 mm tolerance btw)
The MultiConnect Peg I would print with 3 parameters at .12 mm layer height. I used a 10% Gyroid infill pattern but you can probably go up to 20% if you like. I would use a smart brim at a .25 distance to make sure it doesn't come up during printing. I was printing at 145mm on my Neptune 4 Plus, but you probably should print it slower.
Credits to Jonathan (KeepMaking) for creating multiboard
The author marked this model as their own original creation.