Destiny Ghost LED Redesign
Description
PDFFor the LED housing, I centered the bulb location, as well as making the hole large enough to fit a snap-in LED housing.
I removed the entirety of the watch battery design, because I wanted to use a AA battery housing with an on/off switch
The other part I needed to modify was the Switch. I cut the part down in size significantly, because it didn't need to be functional. I added a hole in the center to allow me to feed the bulb and wiring through the rear of the model
Model origin
The author remixed this model.
Differences of the remix compared to the original
For the LED housing, I centered the bulb location, as well as making the hole large enough to fit a snap-in LED housing.
I removed the entirety of the watch battery design, because I wanted to use a AA battery housing with an on/off switch
The other part I needed to modify was the Switch. I cut the part down in size significantly, because it didn't need to be functional. I added a hole in the center to allow me to feed the bulb and wiring through the rear of the model
