Electronic pictures 7" frame

Create your own photo frame that will display your photos at specified intervals, which will be stored in the database.
You will use standard e-paper either in grayscale or color.
The connection to the database takes place via the wifi network at the set time. In the meantime, no power is drawn, so the inserted battery will last a very long time. Charging takes place via the USB C port

You will need: 1. these printed parts
2. ESP32 development board with E-paper output
3. Temperature, humidity, pressure sensor (not necessary)
4. E-paper with a diagonal of 7" in grayscale or color
5. Create your photo database according to the instructions at: www.zivyobraz.eu
6. Connect this frame to your own WiFi network

For print:
-use PLA material
- nozzle 0.4 mm
- layer 0.2 or less
- some parts require supports - organic ones have worked for me

• To print a two-color Voronoi frame, you need to load all the files from the directory into the slicer at once and mark the colors. It is obviously better to use an MMU unit
   
• The frame is compatible with the LaskaKit ESPink ESP32 e-Paper development board