Hygrometer / Humidity Sensor Holder

I bought a bunch of hygrometers/ humidity meter (CX-0726) and I needed to mount them in the filament dry box.

Since the hygrometers require battery change (when it runs out in the future), I decided to try design a mount for it. I mounted the mount/ holder using double-sided tape.

The mount has a catch at the top edge that will catch onto the dimple/ notch on the hygrometer. This hygrometer cost like US$1 per piece.

The hygrometer measures 43 x 43 x 11mm.

Material

• CX-0726 Hygrometer [Aliexpress]

How I printed it

• Material: PLA
• Infill: 15%
• Support: None
• Brim/ Raft: None
• Walls: 3 Layers
• Layer height: 0.20mm