BTT HDMI5 V1.1 display mount Voron

This design is for HDMI5 V1.1

If you are looking for HDMI5 V1.2 mount, use this one:  https://www.printables.com/model/926845-btt-hdmi5-v12-display-mount-voron

Design intents

There are existing mount for the HDMI5 but I ended up redesigning a new one with the following intentions.   Thanks to all the great design out there.  They were inspirations for this design

• Being able to use the provided cables and still look good (flat HDMI cables are nice but $$)
• Mainly offer an option to hide the cables under the screen.  With inexpensive 180deg HDMI and USB adaptors
• Offer another option with using just the provided cables.  But still looks great.  This option can be mounted left or right.  Your choice
• Offer both a single side design as well as double sided (symmetric)
• Compatible with HDMI5 Version 1.1

Printing notes

• All STL are oriented correctly
• No support required
• Print as per Voron specified parameters (0.2 layer, 0.4 width, 40% infill)
• Break the bridge helpers on the mount frame before assembly

BOM

• 6x M3x8 SHCS   (8x for double sided design)
• 2x M3 Heatset inserts   (4x for double sided design)
• 2x M3 T-nuts (to mount to 2020 extrusion)
• Printed parts (Bracket, frame and cable protectors of your choice)
• [Optional]  If you choose to go with 180 deg adaptors:
  • 180 deg HDMI Adaptor
  • 180 deg USB-C Adaptor
  • Print this cable protector instead:  BTT HDMI5 Cable protector-180 deg.stl

Links

180 deg Adaptors I used:

HDMI (https://www.amazon.ca/dp/B0C7KQ1934?th=1)
USB-C (https://www.amazon.ca/dp/B0BLMTGX8H?psc=1)

-------------------------

Update [2024-06-02]

• Added double-sided (symmetric) design
• Added Plain cable protectors in addition to ones with Voron Logo
• Now you can select single-side or double-side design and use any of the cable protector on each sides