Robot Lamp

Introducing my adjustable Robot LED lamp

• Prints in 6 parts (support for one part only)
• Quick and easy assembly
• Adjustable pose

Printed at 0.2 layer height.

Use support only for the "Head".

Print parts as oriented in the picture above.

Hardware:

• You will need 4 M4x30 screws and 4 M4 wing nuts.
• You will need battery-operated puck LED lights with a maximum diameter of 64mm, you can find them on Amazon or Temu: https://a.co/d/eYCCpWs
• Double tape to stick your puck lights.

Here is a quick video showing the assembly process: 

A lot of effort was put into this work, so please leave a like if you like the design!