#0131 Star Trek Themed Poker Playing Card Case [with locking tab]

*** Thanks for checking out this model! ***

If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like! 

**********

Here's a Star Trek themed locking box to stow and protect your poker deck. Easy to print without supports.

Sized for Bicycle Branded “Standard” deck size.

Inside dimensions: 64.5mm x 89.4 mm x 17.1 mm

NOTE: Cap is with tighter clearances (0.2mm total) - for well-tuned printers. If you need more clearances, just dial down your extrusion multiplier - for example, by 0.5% or 1% for both parts. 

*** IMPORTANT NOTE ***

For the best protection for your precious cards, best NOT to print with anything that has carbon fiber (CF) in it, because CF is abrasive and will scratch your deck over time.

Instructions to Open:  Squeeze together on the raised circles on the box and the lid at the same time to unlatch the lid from the box. Then pull apart to open.  

If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!

P.S. Please post some constructive feedback if you'd like to see something improved.