ENDER 3 V3 SE Grinding X / Y Belt Fix V1

New 3D printer, new surprises.

---X AXIS-----

This piece should prevent any grinding on the X axis belt

!!!!-Recommended to push a little higher the X belt catch on the X gantry, be carefull to not do it too much or the belt might come off-!!!!

Science behind this new piece.

Figured out the only part of this whole assembly that was actually misalignedwas that left wheel. The X stepper motor didn't rub at all. The path of the belt that goes around the motor and through that corner was the problem.

The stock part pushes the wheel too high, with 4.8 mm. My new desing comes with 4.6mm, enough for the wheel to not rub the alluminium extrusion but does not push the wheel too much up.

---Y AXIS--- (Work in progress)

!!!!!-M3 nuts required-!!!!!!

Moved the belt catches on the Y axis, trying different heights, so far working as intended.

-V1: Great clearence for the front stepper. Currently testing (not so great on the rear wheel)

-V2: Added clearence for the rear wheel, not tested yet.

*Bed level recalibration recommended after install

It is still a work in progress, wanted to get this out so you people can help me test this. Thank you all for your time.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2

Infill:

Filament: Polyterra PLA Black