Apple Vison Pro Vive Tracker/Tundra Tracker Mount

This is a mount that clips a Vive/Tundra tracker to the side of your Apple Vision Pro.

It was tested with a Vive Tracker 3.0. It should work with Tundra trackers as well.

To attach the tracker mount to the AVP:

1.  Attach the tracker to the mount using printed screws and pins.
2.  I recommend filing down the edges of the clip so you don't scratch the strap on the headset. 
3. Just clip it to one of the sides between the audio pod and the headset.

No need for supports. Printed in PLA.

Print settings:

0.2mm layer height

15% infill

Cut a bit of the mount and glued it to the clip from the rails. Reusing screws and pin models as well.