Chain

As for some reason I hate to print with support I designed this chain link.

To print a chain work like this:
1) print some separate chain links
2) again print some chain links but this time upright and at the correct distance from each other
3) when the print 2) is half way put the separate chain links over those being printed now.
=> you have 2 possibilities, do this while your printer is busy at the other side of the bed or have your printer stop for example with the change filament command (if supported: M600)
4) start over with 1) until your chain is long enough.

Print Settings

Printer:

Delta Rocket

Rafts:

No

No

Resolution:

0.2mm

15%

How I Designed This

designed in Sketchup