Tray for askvoll bed

I've edited the tray from Alex Howser, so that its easier to print (due to missing hexagons). I also made the tolerances smaller (0.05mm) due to being too lose on the model from Alex Howser.  As a nice addition I've added roundes of edges.

Keep in mind the dimensions are also changed (length 250mm and depth 135mm)

It's easily printable on a bambulab p1p with that tolerance

The source can be seen here and edited:

https://cad.onshape.com/documents/3bbb89b2dc410f293cf059aa/w/6d63eee5421b2c8ff643977f/e/33a328e96904ddf7c061680d?renderMode=0&uiState=65df58debc8a16104f667199
Disclaimer:

Keep in mind, that due to the missing hexagons there is a potential risk of mold developing, due to being sealed. It's best to have a small gap or being faced against a inside wall. I can't take responsibility for any damages

• Rounded of Edges
• Left out hexagons
• Increased length and dimensions
• decreased tolerances (to 0.05mm)