Storage box for MK4 Nozzles

This is remix of my model.
This time storage box will be used for MK4 nozzles and adaptors. 
Assemble instruction can be read in original model:
https://www.printables.com/model/771658-nextruder-heater-block-storage-box-for-mk4 

Model have "click clips" on the middle that hold MK4 nozzles.
The MK3 nozzles holes have thread on the bottom so nozzles holds fine inside.

You have 5 versions:

1. Storage for 4 MK4 Nozzles
2. Storage for 2 MK4 nozzles, 2 MK4 adaptors and 4 MK3 nozzles
3. Storage for 3 MK4 nozzles, 1 MK4 adaptor and 3 MK3 nozzles
4. Storage for 4 MK4 adaptors and 6 MK3 nozzles
5. Storage for 2 MK4 nozzles, 1 MK4 adaptors, 3 MK3 nozzles, 1 MK4 ObXidian Nozzle

Notes:

1. Obxidian nozzle head is bigger than Prusa, I added place for it in version 5 only
2. Connect the box with piece of filament, you can push it from the bottom side only.

Model have "click clips" on the middle that hold MK4 nozzles.
The MK3 nozzles holes have thread on the bottom so nozzles holds fine inside.