RatRig VZ Printed Toolhead MGN12C (UNTESTED)

Hello!

Here is another version of the VZ printed toolhead compatible with RatRig V-Core 3.1.

As mentioned by @UjangKarnadi_294653 in his original post,  please refer to vz printed printhead for assembly, print settings and belt clips.

Top features:

• MGN12C only;
• 3010 or 4010 hotend cooling fan support;
• Phaetus Rapido UHF V1 or V2 + Orbiter V2 only, they bolt directly to the top plate, no adaptors needed, less parts;
• 4028 or CPAP cooling;
• kept the same ADXL mounting location as RatRigs EVA toolhead (heat inserts required);
• might be required to remove the metal lever of the endstop switch, mine rattled a lot. If not, the arm included in the mount can be cut off;
• another method of belt tensioning is required;
• .step files included;
• to avoid 2 different top plates, the holes for mounting the ducts for 3010 or 4010 fan have 2 options:  
  • for 3010 fan duct, install 2 heatsert from the bottom into the top plate;
  • for 4010 fan duct, use longer countersunk M3 bolts, insert them from the top, before mouting the extruder, and thread them into the plastic of the duct;

Please note that I have not been able to test this toolhead as I do no longer have the required linear rail. It has been designed as a users request, which will also help in testing it. Of course, any feedback is welcomed, design will be altered if necessary and/or requested. Thank you!

Adapted the toolhead to accomodate MGN12C rail, added 4010 duct for hotend cooling.