Maine Coon

Picture of a tabby Maine Coon cat, created from an Ai picture I made.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 I don't have exact transmission distance on the filaments, but I think this will turn out okay, unless you have really transparent filament.

I used Copymaster black, Copymaster dark grey, eSun light brown and R3D white

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to DARK GREY
At layer #10 (0.88mm) swap to Light Brown
At layer #15 (1.28mm) swap to White for the rest.