Prusa XL Side Filament Sensor Magnet Mod with Magnetic PTFE Fitting Parts

This is untested! I neither have the magnets, nor my XL!

Thank you @IBNobody_123251 and @Digibike_72103 for your designs and ideas! 

Please follow the remix links for instructions! This design is a combination of the two!

You will need:

• PC4-M10 PTFE fittings
• 5x5 mm magnets
• 3x6 mm magnets (or multiple 3x2 mm)

IBNobody's PTFE Fittings Filament Sensor Remix combined with Digibike's Sensor Magnet (spring replacement) Remix