L-Boxx mini side label

Inspired by LausBub's L-Boxx Mini Cover I made my own side label for L-Boxx Mini

It is deliberately fitting tight to stay in place without glue. If you want to additionally use glue, I recommend hot glue as it can be removed easily.
 

The model should be oriented with the bigger, outer surface on the printbed. As it is printed upside down the logo and/or text should also be upside down and placed on the printbed. If you look from below the printbed in prusaslicer you can see what you get. You might have to mirror or turn by 180° (Z) to get the desired orientation.

Text and logos (.svg) can be added directly in Prusa Slicer by right clicking on the model → add part → SVG or TEXT

For Logos in the middle I use
height: 18 mm

For text I use:
height: 10 mm

Positions (from model origin in mm):
left: X-48 Y+10 
right: X+48 Y+10 
middle: X+0 Y-10 

I have to change filament manually, hence I use:

operation: cut 
depth: 0,6 mm
Filament Change at 0,8 mm

If you have automatic filament change and can print multicolor you probably know how to

Notes:
Position of complex logos or multi lined text might need some adjusting from default values

I have good results with 0,2mm layer height and cutting logo/ text 3 layers = 0,6mm deep. The color of the text should also be at least 3 layers heigh (change at 1,4mm) after which you can use any cheap filament as it won't be seen.

If you want to use original bosch-font you can download and install “Bosch Sans Bold” or "Bosch Sans Regular" from the Internet. I deliberately don't link to any source as I don’t have a trustworthy one, but you can find it easily on google.

.step-files are provided, feel free to add a remix.