Galileo 2 extruder + MMU filament sensor
Galileo 2 extruder (ECAS) + MMU filament sensor after extruder
20
61
0
1025
updated February 27, 2024
Description
PDFThis modification of G2E for the Stealthburner has an additional filament detection sensor after the extruder. I have designed this, as other designed didn't seem to be as reliable with my setup. The additional PTFE stickout from my Rapido hotend is around 16mm. Make sure that your PTFE tube sits well between the extruder and hotend.
Additional hardware:
- D2F microswitch with the latch removed
- 7mm steel ball
- 2x 10mm M2 self-tapping screws
Mind the correct orientation of the switch. Print this with the recommended Voron settings.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Additional filament sensor after extruder for ERCF/MMU
