Jürgen Rotner

@JurgenRotner_1768147

Created my own variation of a temperatur tower for PLA and PETG

1h 56m

2× print file

0.20 mm

0.40 mm

PLA
PET

22.00 g

Prusa MINI / MINI+

2008

5652

updated February 27, 2024

I printed the PLA tower because my prints aren't quite where I would like them.

Filament label says 205-220 but I think it works better 195-205, but still too much stringing, will do some cleaning and test again. Can be also humidity on the filament for what I've read, have to do some tests, kind of new at this. (edited)

good file for testing the new filament I bought, thanks

SSGuns

@SSGuns_99926

Testing...testing...1..

Vorpal

@Vorpal_91094

Had to tweak it to the proper range for my filament (changing all the labels and temperatures) since addNorth PETG prints up to 260 C according to the manufacturer (and I will in fact be using 255 C, the hottest with acceptable levels of stringing). A bit of work, but nice that the labels are separate objects in the slicer.

Also had to tweak things for the Mk3.9 a bit, but that was comparatively minor. (edited)