Cable holder

Keep the cables you plug and unplug most often within easy reach with this cable holder. It is made of two parts that clips together firmly. If you need to release the cables, just press the small extrusions on the side in opposite directions. 

The hole diameter is 8mm, which is small enough for usb-c cables and big enough for hdmi/DP cables. It's loose enough for the cable to move freely. If you want it even looser, you can scale it up. All versions have a “with hole” model. Chose the one you prefer depending on if you plan on using double sided tape or a screw (I used Gorilla tough & clear mounting tape).
 

My print settings:
layer height: 0.2mm
Supports: No
Material: PETG