Raspberry Pi Touchscreen case for prusa enclosure

I made a remix of the great design of E-Raw “Rasperry Pi 7” Touchscreen & Rpi 4B Enclosure mount" to fit my prusa enclosure.

My prusa enclosure is based on 2020 profile and 3mm panels. I would like something which can be fixed on top and tighten the panel as well.

I also modified the case to fit a raspberry PI Model 3.

I'll add a picture when everything will be mount on my enclosure.

Assembly instructions:

1. Fix the Raspberry on the screen with the screws provided in the kit.
2. Place the screen in the enclosure (orange part here).
3. Place the Raspberry case.
4. Insert 4 screws M3x35 DIN912
5. Do not overnight the screws otherwise you'll have some marks on you screen.
6. Finally fix the assembly with 2 screws M4x12 (DIN912) on the 2020 profile.

you're done!

Print instructions:

Files

You can use the 3MF Files or the presliced ones.

Material

I recommend printing both files from PETG.

Infill

20%

Recommended layer height

0.2 mm

Supports

Screen enclosure: Not needed

Enclosure Rpi Case: Mandatory

I would be very happy about a like or a rating if you like my project! 

Feel free to take a look at my other designs!