Bambu X1C P1S Tool Storage Topper

Store your tools on top of your Bambu Lab X1C or P1S. This is designed for a specific set of tools that I personally find beneficial, but the STEP file is included to easily modify it to your needs. You will need a larger format printer such as 350x350mm to print in one piece, or you can cut into two.

Printing:

• Use Duramic 3D Silver PLA or equivalent
• 0.4mm nozzle, 0.2mm height, 10%+ infill, 2+ walls
• No supports necessary

Tools:

• Bernz-O-Matic ST2200T Butane Torch
• 500mL Plastic Spray Bottle with Distilled Water
• Bambu Lab Glue Stick
• Bambu Lab Liquid Glue
• Magigoo MO2016 Liquid Glue for ABS, PLA, PETG, TPU
• Magigoo MPC2018 Liquid Glue for Polycarbonate
• Stainless or Brass Brush
• 1" Foam Brush

Note: Amazon links are affiliates.