Star Wars The Bad Batch HueForge Box

I'm a big Star Wars fan and I really love The Bad Batch animated series, so I decided to create this multi-layered HueForge display. I've used a modified version of my HueForge box. This version has a reduced depth that works better for this model.

I'm really loving the result 🤩

The design requires the following colors

• Black
• Dark Grey
• Light Grey
• White
• Bright Red
• Bright Yellow

These are the filaments I've used

• Geeetech PLA Black
• Fillamentum ExtraFill PLA Iron Grey
• Prusament PLA Gravity Grey
• Geeetech PLA White
• Fillamentum ExtraFill PLA Traffic Red
• Fillamentum ExtraFill PLA Traffic Yellow

Print instructions

Since these are rather complex STL files, slicing can take a while. Some of the STL files may report an error, please do not fix them! You will lose details if you do. The errors are a result of the complex STL file HueForge produces.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Plate 1 & 2

• Start with Black
• At layer #6 (0.56mm) swap to dark grey
• At layer #12 (1.04mm) swap to light grey
• At layer #16 (1.36mm) swap to white
• At layer #23 (1.92mm) swap to bright red for the rest.

Plate 3

• Start with Black
• At layer #6 (0.56mm) swap to dark grey
• At layer #12 (1.04mm) swap to light grey
• At layer #16 (1.36mm) swap to white
• At layer #18 (1.52mm) swap to bright red
• At layer #22 (1.84mm) swap to bright yellow for the rest.

No need for AMS or MMU. All color changes are done using filament swaps.

Box

• 0.2 layer height
• 15% infill
• Lid needs tree supports for hole

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Seller subscription.