Hexagonal Infill Display

A simple set of models for a visualization of the different infill patterns compatible in PrusaSlicer. I have printed these with the default 15% infill, but you may change the value as you please. 

To show the infill, the following settings should be changed: 

• Print Settings > Layers and perimeters > Horizontal shells > Solid layers: Top: set to “0”
• Print Settings > Infill > Infill > Fill pattern: set to desired infill pattern.
• *The .gcode and .3mf files already have the correct settings to enable the visual infill.

Note: the tabs are very tight, could be changed to a higher tolerance for easier arrangement.