UniStock-VR Gunstock for Every gun on every FPS

This is a gun stock for all oculus touch controllers (Quest, Quest 2, Rift, Rift S)
The main feature for this stock is that user can change the position of every component while beeing in Virtual reality.
thanks to a multiple locking systems, user can adjust the stock to his prefferences.
there are 3 locking system od the handle.
First one is the standard magnetic system.
it requires 12 magnets 10mm by 2mm per a handle.
The "U-like" shape of the main block, gives a user smooth locking experience.
the locking button on the side of the handle, serves as a permanent lock.
When pressed in, the aluminium part slides through the NoobTube handle, locking it.
Pressing it out, releases the handle.
The third lockin system is situated bellow the handle block. This system allows user to slide accross the rail, and set tho position of the handle according to user`s will. Simply unscrew the screw for releasing the handle, and screw it back to lock the block in position. Additionally, when unscrewed, the handle acts like a pump shot gun. you can use the straight motion of moving front handle to achieve perfect reloading action, without loosing an aim.
For retraction action, use a rubber gum (or gums). attach it on the front lock on the rail, to the hook on the bottom handle part. the amount of the rubber gums will determine how fast the retraction is. If magnets cannot handle the retraction pressure, use the locking button to prevent a fall of the handle.
Butstock can be set for every weapon in games like pavlov, where there are no ingame settings for it. by unscrewing the two screws on the butt, user can adjust the height and the distance between a dominant hand and arm support. It differs between the types of the guns. Rassault riffles tend to have lower sweet spot than snipers, smg, requres a bit shorter ditance and front handle close the back one, and heavy machine gun requires a 180 degree turn on the butt and lifting the mehanism all the way up (video soon)

What else?

To get the stock to work Yo will need.
Super Glue for bottom handle part.
20mm pcv pipe (1 meter. it needs to be cut for to parts. on the picture it is a red rod)
10\10mm wooden list ( on the picture it is 2 red squares.
4x M5 40mm bolts for holding the butt wheels.
2x M5 50mm bolts for butt locking mechanisms.
a self locking nuts x4 M5
on ordinary nuts x2 M5
4x m3 screws for handle lockin button. (can be replaced with super glue)
a rubber gums for retraction system.
2x screws for screwing the rail to the pcv pipe.
2x 15mm by 3mm by 23mm aluminium piece for permantent locking mechanism
You will need to drill a holes in the wooden pieces.