Singer Heavy Duty 4423 Handwheel Upgrade

Singer Heavy Duty 4423 Handwheel Upgrade: Conquer Thick Materials with Ease
4h 40m
1× print file
0.25 mm
0.40 mm
181.00 g
In the contest Sewing
37
196
4
1013
updated September 23, 2024

Description

PDF

 

Tired of hand cramps and struggling to control your Singer Heavy Duty 4423 when tackling thick projects? 

 

This 3D printable handwheel upgrade is here to revolutionize your sewing experience!

 

Problem: The original handwheel on the Singer Heavy Duty 4423 is small, difficult to crank, especially with thick materials like leather. This can lead to wrist fatigue and hinder precise control, impacting your sewing enjoyment.

Solution: This larger diameter (165mm) handwheel upgrade provides improved grip and leverage, making it easier to turn and significantly reducing wrist strain. It fits perfectly onto your Singer Heavy Duty 4423 without wobbling or slipping, ensuring smooth and effortless sewing. Say goodbye to hand cramps and hello to effortless control, even when working with multiple layers.

 

Benefits:

  • Reduced hand fatigue
  • Improved control
  • Perfect fit
  • Easy installation
  • Free to download and print

Parts

For assembly you will need:
printed parts

For parts print the following:

1 x Singer Hand Crank.stl

Assembly

See included photo for visual guide.

  • Remove the original handwheel:
  1. Turn off and unplug your sewing machine.
  2. Gently but firmly grip the original handwheel and apply steady, even pressure and pull the handwheel straight off the shaft. You might need to wiggle it slightly to break the initial hold. 
  • Install the upgraded handwheel:
  1. Slide the handwheel upgrade onto the shaft
  2. Align the locking holes in your printed handwheel with the pin on the shaft.
  3. Push the handwheel firmly until you feel it click into place and is securely seated on the shaft.

Print Settings

These are the recommended settings.

  • Layer height: 0.2mm
  • Extrusion width: 0.4mm, forced
  • Infill percentage: 40%
  • Infill type: grid, gyroid, honeycomb, triangle, or cubic
  • Wall count: 4
  • Solid top/bottom layers: 5
  • Supports: NONE

Notes:

  • This is a custom-designed upgrade and is not an official Singer product nor is it endorsed by Singer. Use at your own risk.
  • This handwheel could also fit on the Singer Heavy Duty 4411, but is still unverified. (You can help verify this by printing the Singer Hand Crank test piece.stl and trying it out on your Singer 4411)

Disclaimer:
This is a custom-designed upgrade, and I am not responsible for any damage or injury caused by the use of this handwheel upgrade. It is not an official Singer product, nor is it endorsed by Singer. By downloading and using this upgrade, you assume all responsibility for its use. Proceed at your own risk.

2024-02-25 Original release
2024-09-23 Upgraded description

Tags



Model origin

The author marked this model as their own original creation.

License