Photo holding Wall-E

As my Wall-E Kit card did really well I thought i'd make another one for the Instant Photo Contest. 

The green model I printed was printed with 0.3 layers and it is a older version with less details and a litte shorter arms. I didn't use supports except for his head where supports are definetley needed. You might also want to put some supports on his shoulders where the arms are supposed to fit. With 0.3 layers the tires were a nice press fit but if it's too loose you might want to use some glue. I tried scaling the model and it works just fine :) the little one was scaled down to 50% of the original and the picture holding still works. Juse use some glue to be safe. 

Hope you enjoy the model and let me know if you have struggles printing it or if there are any problems with the newer version. 

Looking forward to your makes so don't forget to share them and drop a like.