WT32 SC01 Plus Stand, Moai Edition

This is a case / stand for the WT32 SC01 Plus Display module. The module just snaps into place and there is a reset button on the back. The stand is self standing but can also be attached to a surface using screws, magnets or glue.

The model is optimized for SLS and SLA printing. For FDM printing it might be necessary to slightly upscale the model to compensate for warping/shrinking. The hollow version is more suited for SLS and SLA printing (fill with plaster to add some weight) while the solid version has a nice heft when using 95% infill.

Fused as a support to the WT32-SC01-Plus Stand to make it self standing. Produced a hollow version.