Bosch Professional Go with magnetic charging cable for IKEA Skadis

This is a holder for the Bosch Professional Go with a magnetic charging cable for the IKEA Skadis wall.
10
66
2
555
updated May 10, 2024

Description

PDF

German

Um den Bosch Professional Go während der Pausenzeiten zu laden und zu verstauen, hab ich nach einer passenden Lösung gesucht. Da die IKEA Skadis Wand hier viele Möglichkeiten bietet, habe ich ein Halter mit Magnetladekabel entwickelt. Der Grundhalter muss mit Stützstrukturen vom Druckbett gedruckt werden. Sonst kann alles weitere ohne Stützen gedruckt werden

Benötigt wird ein Kabelbinder 2,5x100mm, M3x8mm Innensechskantschraube, M3 Mutter sowie das Kuulaa 3-in-1-Magnetladekabel.
https://www.amazon.de/gp/product/B08JLHVMRS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

 

English
The base holder must be printed with support structures from the print bed. Otherwise everything else can be printed without supports.

Tools:
A cable zip 2.5x100mm, M3x8mm Allen screw, M3 nut and the Kuulaa 3-in-1 magnetic charging cable are required.
https://www.amazon.de/gp/product/B08JLHVMRS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1


Print instructions

We recommend printing the model from PLA or PETG.

It is possible to use the default Prusa Slicer print settings for a 0.4 mm or 0,6mm nozzle.

Recommended layer height: 0.2 - 0.25 mm
Perimeter: 3+
Infill: Triangles, 30%
Supports: from the print bed

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more