RaspberryMatic PoE Housing (Pi 3B+)

I created this housing for RaspberryMatic with PoE-Shield with additional OLED display (generic SSD1306 0,91 inch I²C 128x32) and external antenna.

To mount the RPI-RF-MOD-PCBA with the PoE-Hat you will need some stackable pinheaders for the 2x20 pin connector as well as for the 2x2 pin connector. Also you will need 15mm spacers.

The Pi 3B+ is mounted with M2,5x16mm cylinder head screws. The RPI-RF-MOD-PCBA itself is secured with a M2,5x16mmm screw, too.

The opening for the dc connector on the RPI-RF-MOD-PCBA can be cut out and could be used as well (decide for one supply method!) as the Pi's Micro USB socket.

I also created an insert for rack mounting.

===============================================================

24-03-26: The OLED-holders now fit more generic display styles, implemented cooling openinings and funnel for Noctua A4-10 5V PWM fan (Black-Black, Blue-Blue, Yellow-Red, Green-nc)