CSM high needle count cylinder and ribber dial variations (UNTESTED)

Additional cylinder and ribber dials with higher amount of needles. But beware, the yarn slots are about 0.8 to 1mm smaller than for a 60 or 64 cylinder, so it might be necessary to use a thinner yarn with these variations.

You will need to slice them with Arachne algorithm to get the most accurate print.

Available variation:

• Cylinder 80/96
• Ribber dial 40/72

They are made on request. I did not print and try any of these and so I rate them as UNTESTED.

Higher amount of needles.