[350mm MGN12H linear rail
75mm down from top to top of rail
use align block to align rails]
[one 2020 V slot extrusion rail 300mm long
Drill 3 holes 3mm Diameter, one in the centre of the rail and then 60mm from the centre left and right.
3 x M3 x 25mm]
[8 x M3 x 12mm, 4 per block
printer left and right mounting blocks]
.2 layer height, 20% infill, tree(manual) support needed
Side cover insert small for clearance [ 6 off] (Check clearance manually)
20 M3 Slot T-Nuts
The author marked this model as their own original creation.
