Evolution: Another World (special addition) Storage

Evolution: Another  World (special addition) Storage that is just now shipping from a KS effort…have yet to actually play it with my group…just picked it up today.

I never really care for the liners that come with games….especially when you need to pull everything out.

I made this box, and it uses magnets, to hold all the small components…and leave space for the cards an instructions in the box.  4 each of: 3x3, 3x2, 3x5.  Which you can find on Amazon.  The small ones will require a spot of glue and a press fit with some needlenose pliers, the large ones are a little loose, and superglue will be needed to hold them in place.

The thing I like most, is that the energy tokens have a magnetic flap that holds fine when stored, but a push …where it says push here, it flips open so you can dump the tokens out.

I included the box file if you wish to edit on Fusion360.

Additionally, I created some dividers and printed some card storage holders.  The ones I like are from 10ETrinkets.  You can purchase the models here:

https://cults3d.com/en/3d-model/game/card-game-storage-case-and-draw-discard-tray-all-in-one-kids-ruin-the-boxes-to-your-card-games-two-deck-tall-40mm

you can also purchase off etsy, but…you need them resized.

The cards will fit, if you increase the double deck dimensions by 23% (width), 33% (length), 10% (height) (cards are 81x121).  You will need two of these.  Dividers provide a thin divider identifying each card group.