Snorlax HueForge

You do NOT need a multicolor printer for this. Everything is done with filament swaps at set layers. 

HueForge rendition of Snorlax

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Pro Black
PLA Paramount 3D British Racing Green Transmission Distance: 3
PLA PolyLite Pro Metallic Bronze Transmission Distance: 1
PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to British Racing Green
At layer #13 (1.12mm) swap to Metallic Bronze
At layer #17 (1.44mm) swap to White for the rest.