The STL file was generated using a 0.4 nozzle but I sliced it using a 0.6 nozzle. So I'm sure I lost some detail but it still looks great!
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.35mm
Filaments I Used:
Zyltech Black PLA
Inland Gold PLA
Inland Light Brown PLA Inland Sand Tough PLA
Inland White PLA
Swap Instructions:
Start with Black
At layer #5 (0.51mm) swap to Gold
At layer #8 (0.63mm) swap to Light Brown
At layer #26 (1.35mm) swap to Sand
At layer #40 (1.91mm) swap to White for the rest
The author marked this model as their own original creation.