Festool TS55 anti-tilt stops

This system prevents the TS55 saw leaving the guide rail FS when cutting with the sloped blade. Even with a 45 degree angle the saw remains secure on the rail thanks to the 2 stops screwed on the sole of the saw

Inspired and adapted from https://www.thingiverse.com/thing:4870249

I modified and added a 2nd stop to the front. It's 5mm larger than rear one to fit saw sole design

Printed with YellowGreen PLA from FilamentPM matching with Festool color RAL6018

You'll need 2 M6x30 hex screws and 2 knobs for assembly 

Festool knob model and print files are available from there → https://www.printables.com/model/113905-festool-knob-v2

Warning: This design fits for TS55 REBQ. Check size before printing for a different model. e.g. doesn't fit for TS55 EBQ

As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes

You can also look at other Festool accessories I designed and 3D printed

• Festool TS55 REBQ dust cover
• Guide stop for Festool rail FS/2 and knob
• Festool Knob V2
• Festool TS55 vacuum hose connector
• Festool clamp FS serie protective pads
• Deflector for Festool FS/2 Guide Rail Remix
• FESTBOX a cool box to be hanged to your Festool Systainer 

Enjoy

If you like this model, take a look also at my other designs

EDIT 27/12/2021

On top of .stl files I uploaded .f3d one so you can modify the design and adapt it to your needs

EDIT 18/02/2022

Fits also for TSC55 KEB version 

EDIT 30/07/2022

Add link to Festool knob V2

Modify and add a 2nd stop to the front