optical illusion hueforge

Hueforge Optical Illusions

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic White Transmission Distance: 5.0

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Beige
At layer #20 (1.68mm) swap to White for the rest.