Offshore Tugboat + Cargo

This offshore tugboat can carry cargo in its cargo hold. This model requires support and it also requires stronger infill at the bottom

Printing Description:

Print with 20% cubic infill for the first 7mm of the print. After the first 7mm, print with preferably 5%. The boat will flip and become unstable if there isn't a 20% infill at the bottom. 

Make sure to support the back of the vessel if you download the support-required one.

Please download this on Makerworld:

https://makerworld.com/en/models/210581#profileId-237633

Update: The No-support model is now fixed for people that had problems with it.