Landinggear for Eclipson Model A (Free Version)

I downloaded the Free version of Eclipsons Model A. but there is the fuselage with the Landinggear not included. So i designed one to glue on the free version.

it takes D3mm steelrods, wich are bended in shape.
15mm then 90° angle, then 125mm and then 25mm 40°angle.

the Landinggear has an arrow to show wich side ist the front.
it gets glues 1.5mm behind the Gluejoint of the mainfuselage.

Link to the Free .stl of the Plane:
https://www.eclipson-airplanes.com/modela

also check out the parts to make a stronger wing:

https://www.prusaprinters.org/prints/66510-centerwingspar-eclipson-model-a

if you want the STEP or Fusion360 file let me know. i'll share it.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

Yes

Supports: 

No

Resolution:

0.2

Infill: 

20

Filament:

Purefil PLA 
 

Notes: 

included my Projectfile from Prusaslicer!

Print the Tire with TPU i used 2 Perimeters and no Infill
the Rims can be printet normel with PLA

Category: R/C Vehicles