Magnetic Camera Mount for Prusa Enclosure

This is a magnetic camera mounting bracket for the Logitech C920 camera designed to be used with the Original Prusa Enclosure. The USB cable feeds through the hole in the side and the camera base fits snugly inside. 

There is space for five (5) small magnets to be embedded in the print so it sticks to the inside corner of the Original Prusa Enclosure. The magnets are 6mm diameter & 3mm deep.

The magnets allow you to stick the assembly to any of the metal parts on the enclosure. I have it towards the bottom on the front right side. One of the pictures above shows what the camera's view looks like. 

I printed this on my MK3 with 0.2mm layer height, 10% infill, and Organic supports for the cable hole (probably can get away without supports). I used PETG but any filament should be fine. 

I included my Fusion 360 file also if anyone has ideas on how to improve upon this design.