Clock Travel Case

7/25/2024 - I have updated this model to include the transformer and wire. Before it was cumbersome to put the items separately into the luggage without tangles. The modifications include a wire winder and new case bottom with alignment holes for glueing the winder. The alignment holes for 1.75 filament pieces.. I find the best glue is Goop. It does not need clamping and is very firm after about 2 hours.

9/2/2021 - I have made a small design change. The top will still too loose, so I increased the friction fit. The latest version number is 1.6. If you have printed the previous version, you need only to reprint the top part.

11/4/2020 - I have updated the clock case because it opens too easily especially when just thrown in with the clothes. I also recommend that you use five peripherals when printing as this will give a much more stable sliding fit to the case cap. the latest version is 1.5. If you question which version you have, look in the inside of the clock case bottom for the version number.

The slight recess in the top fits over the slightly protruding snooze button.

The Oregon projection travel clock is nice but there is no travel case. This is unfortunate because your clothes can press the clock buttons.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

0.2

Infill: 

20%

Filament:
eSun PETG various 
 

Notes: 

use 5 peripherals when printing to give a better sliding joint.

Category: Organization