leaperkim lynx kickstand

I don't recommend this as upgrade part if old one is still in intact as stock one is in my opinion really good. Unless your planning to add upgrades to this model, like led lights or mount to theft alarm. 

In my case I broke it so I thought why not print more durable replacement from TPU. 

This uses same mounting holes and screws. Only thing you need is 2 m6 nuts unless you're using stock aluminum bar. I used nylock nuts.

Printing

Stands were printed from 95A TPU and bar from PP. It needs to be impact resistant material or it will break in first crash. I used 7 walls and modifier cube for infill where wasn't needed that much strength.

bar needs to be stopped  mid print for nut insertion.