EBB36 USB motor mount

As I run my V0.1 with a EBB36 and the USB connection, I needed a mount to attach the PCB and secure the harness/USB cable.

I use this with a ProtoXtruder, but it should fit all extruders with the motor 45° angled like the Sherpa Micro.

It is designed with minimal clearance for my current setup, so please check your fit.

Here why I use USB and not CAN:

https://os.ratrig.com/blog/no-you-dont-want-to-use-can/

Print it according the Voron guidelines for ABS/ASA with 0.2 layer.

https://docs.vorondesign.com/sourcing.html

You can print it without supports and the screw holes are closed with one layer on purpose.