Grateful Dead Dancing Bear Magnet (2 of 5)

Summary:

Grateful Dead Dancing Bear Magnet (2 of 5). This 2.75 inch (70mm) tall magnet has three embedded 6x3 magnets. Multiple colors but no MMU or AMS necessary.

Print settings:

PLA, 0.4 nozzle, 0.2 layers, 2 walls, 15% grid infill, classic wall

Magnets:

Designed for three 6x3 magnets. My magnets actual measurement was 6.0mmx2.5mm so the magnet hole is 6.3x2.8. I paused on the top magnet cavity layer and super glued the magnets in before resuming the print. 

Filament changes:

Color order for filament changes depends on what you want. I did black, green, purple but feel free to be creative. 

If you stick with 0.2 layer heights: 

• Layer 17 insert magnets
• Layer 19 change from color 1 to color 2
• Layer 23 change from color 2 to color 3

*Be sure to double check your slicer for layer pauses

Please upload your make - I would love to see your color schemes

Links to other Grateful Dead Magnets:

• Dancing Bear 1: https://www.printables.com/model/775348-grateful-dead-dancing-bear-magnet-1-of-5
• Dancing Bear 2: https://www.printables.com/model/775362-grateful-dead-dancing-bear-magnet-2-of-5
• Dancing Bear 3: https://www.printables.com/model/775380-grateful-dead-dancing-bear-magnet-3-of-5
• Dancing Bear 4: https://www.printables.com/model/775386-grateful-dead-dancing-bear-magnet-4-of-5
• Dancing Bear 5: https://www.printables.com/model/775401-grateful-dead-dancing-bear-magnet-5-of-5
• Steal Your Face: https://www.printables.com/model/774835-grateful-dead-magnet-steal-your-face