Prusa Enclosure Phone Camera Mount

As I couldn't find any models online to put my phone on top of the Prusa Enclosure, I quickly threw this model together. It should fit most phone models. The top part of the model has a cavity so you can guide a charger cable to the top of the enclosure to make sure your phone stays charged for the entire print (as most old phone have poor batteries).

I printed mine in Prusa Orange PETG and it does work quite well. Use 2x M3nS nuts and M3x8 to attach it to the top of your enclosure, slide your phone in and add the camera to your Prusa Connect account (via https://webcam.connect.prusa3d.com). 

If you don't want to use my gcodes, I recommend printing it on its short side as that almost completely removes the need for supports. I added supports for the bottom M3nS cavity, but it may have printed well without them. The model should be oriented in the correct position if you import the .step or .stl file straight into PrusaSlicer.

If you have any comments about my design, please let me know. I am not an experienced designer, so tips & tricks will be appreciated.